項目信息

Project information

項目照明需求:

Project Lighting requirement

湖南曉光汽車模具有限公司車間照明要求17米高距離下，離地1米測試平均照度不低于300LUX,且光線均勻，無死角。

   Workshop Lighting of Hunan Xiaoguang automobile mold require illumination is not less than 300lux, Lighting uniform, without dark space; under 17m high distance and during 1 m working area

項目解決方案:

Solution

經過照度模擬，使用眾光200W DIY工礦燈，吊鏈安裝。高度17米，間距8米，數量1670盞。

   After illumination simulation, select ZHL 100W DIY range high bay light, hanging fixture. High 17m, between 8m distance, quantity 1670pcs

項目選用產品:

Lighting Product

眾光200W DIY工礦燈 6000K 光效120LM/W 顯指80 IP65

   Series: ZHL DIY range,Wattage：200WColor temperature：6000K,Luminous efficiency：120LM/W,CRI：80,IP grade：IP65

照明效果描述:

After lighting promote effective

采用眾光高光效200W DIY工礦燈，測試平均照度達到365LUX,90度單顆透鏡精準配光，無死角，暗區.替換原來400W金鹵燈，照度提高了40%，節能效率50%以上，得到了曉光模具高層的高度認可。   Select ZHL High Luminous 200W DIY high bay light, Testing average illumination 365 LUX, 90 degree single exact photomatric lens, without dark area, replace traditional 400W HID lighting fixture, illumination improve 40%, saving energy more than 50%， gain the highly approval from the leader of Xiaoguang automobile mold 

項目完工圖片: